- NTN Bearing Brazil Bearings Ltda.
- Mounted Units & Inserts Needle Non Thrust Roller Bearings Pillow Block Bearings
Home>Products>Mounted Units & Inserts>QM INDUSTRIES QVPN14V060SEN Mounted Units & Inserts
English
QM INDUSTRIES QVPN14V060SEN Mounted Units & Inserts
With PEER BEARING CO. Brand over 10170 full-service stores, our QM INDUSTRIES QVPN14V060SEN Mounted Units & Inserts inventory is 0.0 Inventory extensive and our parts are priced right. within 24 hours. This helps you N/A Minimum Buy Quantity maximize your productivity NTN Bearing Brazil Bearings Ltda. by saving time and your hard-earned dollars.
- QM INDUSTRIES
QVPN14V060SEN
- N/A
- PEER BEARING CO.
- 0.0
- 8865590630820
- PEER BEARING CO.
- M06110
- Bearings
-
NTN Bearing Brazil Bearings Ltda.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
QM INDUSTRIES QVPN14V060SEN Mounted Units & InsertsTechnical information
| Minimum Buy Quantity: | N/A | Brand: | PEER BEARING CO. | Inventory: | 0.0 |
| Weight: | 0 | EAN: | 8865590630820 | Manufacturer Name: | PEER BEARING CO. |
| Product Group: | M06110 | Category: | Bearings |
QM INDUSTRIES QVPN14V060SEN Mounted Units & InsertsCross reference
QM INDUSTRIES QVPN14V060SEN bearing Size Chart (mm/inches) | |
|---|---|
| Bearing number | 7007 ACD/HCP4AH |
| Size (mm) | 62x35x14 |
| Bore Diameter (mm) | 62 |
| Outer Diameter (mm) | 35 |
| Width (mm) | 14 |
| d | 35 mm |
| D | 62 mm |
| B | 14 mm |
| d1 | 43.7 mm |
| d2 | 43.7 mm |
| D1 | 53.3 mm |
| K | 0.5 mm |
| C1 | 8.4 mm |
| r1,2 - min. | 1 mm |
| r3,4 - min. | 0.3 mm |
| a | 18.5 mm |
| da - min. | 39.6 mm |
| db - min. | 39.6 mm |
| Da - max. | 57.4 mm |
| Db - max. | 60 mm |
| ra - max. | 1 mm |
| rb - max. | 0.3 mm |
| dn | 45.3 mm |
| Basic dynamic load rating - C | 14.8 kN |
| Basic static load rating - C0 | 9 kN |
| Fatigue load limit - Pu | 0.38 kN |
| Limiting speed for grease lubrication | 24000 r/min |
| Limiting speed for oil lubrication | 38000 mm/min |
| Ball - Dw | 7.938 mm |
| Ball - z | 16 |
| Gref | 1.98 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 0.87 |
| Calculation factor - Y0 | 0.38 |
| Calculation factor - X2 | 0.41 |
| Calculation factor - Y1 | 0.92 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Preload class A - GA | 90 N |
| Preload class B - GB | 180 N |
| Preload class C - GC | 360 N |
| Preload class D - GD | 720 N |
| Calculation factor - f | 1.06 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.02 |
| Calculation factor - f2C | 1.05 |
| Calculation factor - f2D | 1.08 |
| Calculation factor - fHC | 1.02 |
| Preload class A | 95 N/micron |
| Preload class B | 123 N/micron |
| Preload class C | 160 N/micron |
| Preload class D | 211 N/micron |
| d1 | 43.7 mm |
| d2 | 43.7 mm |
| D1 | 53.3 mm |
| C1 | 8.4 mm |
| r1,2 min. | 1 mm |
| r3,4 min. | 0.3 mm |
| da min. | 39.6 mm |
| db min. | 39.6 mm |
| Da max. | 57.4 mm |
| Db max. | 60 mm |
| ra max. | 1 mm |
| rb max. | 0.3 mm |
| dn | 45.3 mm |
| Basic dynamic load rating C | 14.8 kN |
| Basic static load rating C0 | 9 kN |
| Fatigue load limit Pu | 0.38 kN |
| Attainable speed for grease lubrication | 24000 r/min |
| Attainable speed for oil-air lubrication | 38000 r/min |
| Ball diameter Dw | 7.938 mm |
| Number of balls z | 16 |
| Reference grease quantity Gref | 1.98 cm³ |
| Preload class A GA | 90 N |
| Static axial stiffness, preload class A | 95 N/µm |
| Preload class B GB | 180 N |
| Static axial stiffness, preload class B | 123 N/µm |
| Preload class C GC | 360 N |
| Static axial stiffness, preload class C | 160 N/µm |
| Preload class D GD | 720 N |
| Static axial stiffness, preload class D | 211 N/µm |
| Calculation factor f | 1.06 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.02 |
| Calculation factor f2C | 1.05 |
| Calculation factor f2D | 1.08 |
| Calculation factor fHC | 1.02 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.13 kg |
QM INDUSTRIES QVPN14V060SEN Mounted Units & Inserts Cad Models
Contact Us
- NTN Bearing Brazil Bearings Ltda.
- AddressAv. Das Industrias, 380 - Industrial Park - ZIP Code 83.820-332 - Fazenda Rio Grande - PR - BRAZIL
- Phone(Working Time)627-85-24
- Fax
Related News
| How do you repack wheel bearings with grease? |
| How long before a wheel bearing fails? |
| How many bearings does a skateboard have? |
Product Categories
- Mounted Units & Inserts
- Needle Non Thrust Roller Bearings
- Pillow Block Bearings
- Plain Bearings
- Precision Ball Bearings
- Roller Bearings
- Self Aligning Ball Bearings
- Single Row Ball Bearings
- Sleeve Bearings
- Spherical Plain Bearings - Radial
- Spherical Plain Bearings - Rod Ends
- Spherical Roller Bearings
- Take Up Unit Bearings
- SKF 6204 Bearing
- Ucp 204 Bearing
- 623zz Bearing
- 6000 2rs Bearing
QM INDUSTRIES QVPN24V110SET Mounted Units & Inserts
QM INDUSTRIES QVPN24V110SEN Mounted Units & Inserts
QM INDUSTRIES QVPN24V110SEO Mounted Units & Inserts
QM INDUSTRIES QVPN24V110SEM Mounted Units & Inserts
QM INDUSTRIES QVPN24V110SEC Mounted Units & Inserts