FAG 62206-A-2RSR Single Row Ball Bearings

d:7 mm; Nlim:51,000 rpm; Da max:17 mm; ra max:0.3 mm; Characteristic rolling element frequency, BSF:3.44 Hz; Characteristic cage frequency, FTF:0.36 Hz; D:19 mm; B:6 mm; da max:9.2 mm; da min:9 mm;

Designation of bearing:EX209G2T04; C0:20.8 kN; Weight:2.07 kg; A2:40 mm; G:R1/8"; SW:4 mm; d:45 mm; L3:45 mm; E:24 mm; B:42.8 mm;

Ball Bearing Housing Series:209 Series; Bearing Locking Device:Tapered Adapter Slee; Shaft Attachment (2):Grip Tight; Bearing Series:209 Series; Flinger Type:Rubberized; Ball Grade:Class 10; Bearing Bore Shape:Round; Housing Type:4 Bolt Flange; Manufacturing Plant Location:Crossville, TN - DC; UPC:7

Self Aligning:Self Centering; Base to Center Height:Not Applicable; Retainer Material:Nylon; Bearing Inner Ring Material:Steel; End Cap Groove:No; Max Bearing Speed:5500 rpm; Expansion Type:Non-Expansion; Grease Type:Unirex N2; Ball Bearing Housing Series:207 Series; Housing Material:Cast Iron;

A1:18 mm; T min.:-20 °C; J:150 mm; B:65.1 mm; e:38 mm; T max.:200 °C; S:25.4 mm; L:188 mm; C0:40 kN; Designation of bearing:UC213G2T20;

Recommended tightening torque for set screw:3.7 Nm; H2:62 mm; Weight:0.58 kg; d:17.46 mm; B:31 mm; E:13 mm; S:12.7 mm; H1:11 mm; J:52 mm; A1:22 mm;

Bearing Insert Material:Steel; Flinger Type:Rubberized; Seal Type:Triple Lip; Ball Bearing Housing Series:211 Series; Ball Material:Steel; Flinger Material:Steel; Anti-Rotation Pin:Yes; Manufacturing Plant Location:Rogersville, TN; Ball Grade:Class 10; Self Aligning:Self Centering;

d:76.2 mm; Recommended tightening torque for set screw:54.5 Nm; d1:113 mm; C0:76.8 kN; D:160 mm; C:42 mm; Weight:5.28 kg; B:74.6 mm; B2:31.8 mm; G:5/8-18UNF;

Recommended tightening torque for set screw:22 Nm; H1:22.5 mm; d:55 mm; Dz:110 mm; H:63.5 mm; Weight:3.67 kg; S:22.2 mm; s1:27.8 mm; C0:29.2 kN; Z:77.7 mm;

Recommended tightening torque for set screw:3.5 Nm; H:27 mm; s1:11 mm; J:88.5 mm; A1:20.5 mm; L:119 mm; H1:11 mm; Designation of open end cover:SCO202-15; N1:14 mm; B:22 mm;

d:50.8 mm; Weight:1.06 kg; T max.:100 °C; B:55.6 mm; s1:27.8 mm; C0:25.5 kN; C:34 kN; Recommended tightening torque for set screw:18.7 Nm; Designation of bearing:SUC211-32; S:22.2 mm;

ra max:0.6 mm; Characteristic inner ring frequency, BPFI:4.37 Hz; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:2.63 Hz; D:40 mm; Static load, C0:4.6 kN; Min operating temperature, Tmin:-20 °C; rs min:0.6 mm; d:17 mm; Radial clearance class:C3;

C0:15.2 kN; Z:48.7 mm; Weight:1.23 kg; d:34.92 mm; A2:44.4 mm; A:34 mm; A1:14 mm; S:17.5 mm; e:19 mm; H:161 mm;

Dz:70 mm; Weight:1.01 kg; C:19.5 kN; E:18 mm; B:30 mm; H:42.9 mm; Designation of housing:PG206N-; Designation of open end cover:SCO206-30; S:8 mm; H1:17 mm;

C0:15.2 kN; Dz:80 mm; Weight:1.2 kg; T min.:-20 °C; T max.:200 °C; N:16mm; d:36.51 mm; Designation of housing:FL207N-; Z:48.7 mm; G:M6x1;